PreSonus Blog

Category Archives: Ampire


Stereo Cabs in a Single Ampire

Ampire has a User cab that can load impulse responses. You knew that, right? What you may not know is that you can load stereo cab impulses, and they magically make the User cab stereo. If you’re thinking “but creating impulses is such a hassle,” it’s not—let’s get started.

How It Works: Overview

Start by downloading the 44.1, 48, and 96 kHz stereo impulses. These are 1-sample spikes, so if you listen to them, don’t expect a thrilling audio experience. To create the impulse response, load a stereo impulse into an audio track, but no other audio—just the impulse. Send the audio to two cabs, set up in stereo (e.g., using two FX Channels, panned as desired). Don’t include any amps or effects—only the cabs. Bounce or otherwise mix/export the result. This is the stereo impulse response.

Step-by-Step Instructions

For the sake of example, we’ll assume you want a 4×12 M65 and a 2×12 VC 30 as your stereo cabs, but you can use any cabs you want, including cabs from other amp sims. Referring to fig. 1, this setup works for Artist or Pro.

Figure 1: Setup for creating a stereo impulse response.

  1. Create a stereo audio track, and load the impulse that matches the song’s sample rate.
  2. Create two FX Channels.
  3. Insert an Ampire into each FX Channel. Make sure that amps and effects are bypassed.
  4. Choose the 4×12 M65 cab for one Ampire, and the 2×12 VC 30 for the other one.
  5. Create a pre-fader Send to each FX Channel from the Stereo Impulse track, so you can turn the Stereo Impulse track’s fader down.
  6. Pan the FX buses as desired to create a stereo image for the two cabs.
  7. All the faders and Send levels should be set to 0 (except for the Stereo Impulse track fader, which should be all the way down). Note that the Send levels default to -6.0, so set these to 0.

Create the Impulse

  1. Click on the Stereo Impulse, then type Shift+P to set the loop indicators to the impulse length.
  2. Select Song > Export Mixdown. Choose the appropriate options (fig. 2). 64-bit float works fine for this application. Also check Import to Track.

Figure 2: Export your Impulse Response so you can use it with Ampire.

  1. Click on OK. This creates a track with an Impulse Response that’s the same length as the original impulse, and imports the new Impulse Response to a Song track.
  2. Normalize the Impulse Response you just created to around -3 dB.
  3. Create a folder for your stereo impulse responses, open it in the Browser, and drag the normalized Impulse response into it. Your work is done.

Fun Time!

DOWNLOAD THE IMPULSES HERE

Create an audio track, load Ampire, plug in your guitar, and select an amp. Choose the User cab, and then click on the + symbol in the Mic A: field. Navigate to where you saved the impulse response, load it, and kick back with your cool stereo cab.

To get you started, the folder you downloaded with the impulse also has stereo Impulse Responses for the M65+VC30 and 4x10American+2x12Boutique stereo cabs. Try them with the new High Gain and Painapple amps…you’re gonna love ‘em.

Ampire & Ampire High Density Pack Demo with Bobby Burnette of Wasted Creation

Bobby Burnette of New Orleans progressive deathcore band, Wasted Creation performs a guitar playthrough of their song “Asmodeus” at River City Studio here at PreSonus HQ in Baton Rouge.

WATCH THE PLAYTHROUGH

This session was tracked in Studio One Professional through the Revelator io24 audio interface. All guitar and bass tones are straight from Ampire, our guitar amplifier, cabinet, and pedal emulation plug-in. Some sounds and models featured were from the Ampire High-Density Pack expansion for Ampire.

*The original recording of “Asmodeus”, and this playthrough were both recorded, mixed, and mastered by PreSonus’ very own Product Manager, Kyle Eroche.

THE PRESETS

Here is a breakdown of the presets used in this track. Provided by the engineer of this track, Kyle Eroche.

Wasted Creation Ampire Presets. Click to zoom

CLICK HERE  To get the Ampire preset files used in this track for FREE

*Ampire High Density Pack required to use these presets.
WC Lead
  • Amp: Gazoline Emc2 (High Density Pack Only)
  • Cab: 4×12 Gazoline (High Density Pack Only)
  • Pedals:
    • Pre: Demolition Drive (High Density Pack Only)
    • Post: Reverb > Delay
WC Mod Clean
  • Amp: Blackface Twin
  • Pedals:
    • Pre: Compressor
    • Post:PAE Chorus 1 > Space Reverb (High Density Pack Only)
  • Cab: 2×12 Blackface
WC High Gain Rhythm 
  • Amp: Metal Machine+ (High Density Pack Only)
  • Pedals: Gate > Demolition Drive (High Density Pack Only)
  • Cab: 4×12 American
WC Bass
  • Amp: STV
  • Cab: 8×10 STV

LINKS

Listen To Wasted Creation

Check out the PreSonus products used in this video:

New PreSonus Sphere Artist: Emily Wolfe’s “LA/NY” Playthrough

Here’s Emily using the Revelator io24 audio interface to perform her latest track, “LA/NY,” live from her home studio setup!

 

In conjunction with Studio One‘s Show Page, the pre-recorded backing tracks (drums/synthbass) and her live vocal and guitar audio signals can be professionally mixed and ready for livestreaming.

“LA/NY” is just one of many tracks from Outlierher latest record. She discusses more about the production of Outlier below.


Tell us a bit more about “LA/NY”

“LA/NY” is a new song off my latest album, Outlier. It is a bit of a different direction for me, because I wanted to put forth a killer pop tune that also shined a light on my love of a fuzzy guitar solo. 

Outlier is an album built on exquisite tension: like an endless push-and-pull between desire and resistance, determination and self-sabotage, the instinctive need to belong and the urge to strike out on your own. My songs were produced by Michael Shuman (Queens of the Stone Age and Mini Mansions) and it’s an album full of guitar-drenched sounds that’s wildly unpredictable and immediately magnetic.

What amp/pedals did you use for “LA/NY”?

It was all done within Studio One, using the PreSonus Ampire plug-in. Specifically, I used the Wild Drive, Demolition Drive, Equalizer and Delay pedals running into the Blackface Twin model amp paired with a 2×12 American Cabinet.

(NOTE: if you’re a PreSonus Sphere Member, you can download her exact Ampire Preset here)

How did you first discover PreSonus?

I first discovered PreSonus while working at a music shop in Austin, TX. They sold audio recording equipment from all different brands, but I noticed that PreSonus had the most intuitive software (Studio One Artist) included, as well as the best price point.

What was your first PreSonus product?

It was the Studio 1810c audio interface, but I have since upgraded to a Studio 1824c. I’ve got the FaderPort to the right of my computer keyboard. I also now have their Revelator io24 that you see me using in the video above, of course!

How long have you used Studio One?

About three years now.

What are your Top three favorite features about Studio One?

My favorite aspect of Studio One is how easy it is to use. The drag & drop aspect helps me work really quickly and efficiently. I also really love using Impact for drum sounds, Presence for sample-based instrument sounds, the Mai Tai polyphonic synthesizer, and Ampire for pedal FX and amp modeling.


We’re so stoked to welcome Emily into the family as a Featured Artist on PreSonus Sphere!

She is sharing eight of her custom Ampire Presets, along with a custom Vocal Preset and a Mai Tai synthesizer patch for all PreSonus Sphere members to access and enjoy.

 

Emily Wolfe: Featured PreSonus Sphere Artist


Join PreSonus Sphere today to check out Emily Wolfe’s exclusive Presets and from those by other featured artists!

Only $14.95 per month for Studio One Professional, Notion, and so much more.

Metal Guitar Attack!

They’re called “power chords” for a reason—that delightful mix of definition, sludge, and hugeness is hard to resist. But can we make them more huge and more powerful? Of course, we can, so let’s get started

This tip gives two options: non-real-time, and real time (using the High Density Ampire pack, although other amp sims and processors can work, too). Either technique also works well for LCR mixing fans.

Non-Real-Time Hugeness

  1. Insert Ampire in your guitar track, and edit it for your ideal sound (the Default Ampire preset is a good place to start).
  2. Right-click in the track’s column, and select Duplicate Track (Complete).
  3. Repeat Step 2. Now you have three identical tracks with identical processing.
  4. The key to getting Total Hugeness is transposition. Click on one track’s Event, open the Inspector (F4), and set Transpose to -12 (fig. 1). Click on another track’s event, and in its Inspector, set Transpose to +12. Don’t change the pitch of the remaining track.

After the next section, we’ll get into panning and EQ.

Figure 1: The guitar power chord track has been duplicated twice. The audio on the track to the right has been dropped an octave.

Real-Time Hugeness

Follow the steps above for non-real-time hugeness, but don’t do Step 4. Instead:

  1. For one of the tracks, open up Ampire. Insert the Pitch Shifter before the amp, choose “dn 1 Oct” (fig. 2), click on the top of the pedal, and then drag up until the pedal’s Tune tooltip shows 100. The audio will now be transposed an octave down. If you don’t have the Ampire High Density pack, the transposers in other amp sims will work, but the one in High Density seems better than average.

Figure 2: The Pitch Shifter processor provides real-time transposition.

  1. Similarly, do the same processing on another track, but this time choose “up 1 Oct.”

What’s Next

Whether you chose real-time or non-real-time hugeness, you now have three tracks: Standard pitch, tuned down an octave, and tuned up an octave. Let’s do panning and levels. Here are some options.

  • Standard pitch full left, +12 center, -12 full right. This gives the biggest sound and is used in the audio example.
  • Standard pitch full left, -12 full right, and mute the +12 track. This is ideal for all you LCR fans. It opens up a big hole in the center for bass, kick, snare, and vocals.
  • Standard pitch full left, +12 full right, -12 full right. Another LCR favorite. The +12 gives a more defined sense of pitch in the right channel, so something else with a strong sense of pitch (e.g., Organ of Doom) can fit comfortably in the left channel.
  • Standard pitch center, +12 full left, -12 full right. This emphasizes the main guitar track with the standard tuning.

This approach also lends itself well to automating mute on the various channels. Unmute the octave below when you want to fatten the sound, unmute the octave higher when you want a more defined sense of pitch.

Applying EQ to the transposed audio can customize the sound further. If you’re doing a duo with only drums and guitar, on the octave below track, boost the bass and trim the highs. Pan it to center, and pan the other two tracks left and right. Another possibility is giving more definition to the octave higher track by rolling off the lows and highs a bit and boosting the mids around 2 kHz or so.

Let’s check out the audio example…remember, it’s only one guitar.

Dive into Ampire and Studio One with Forest Whitehead

Forest Whitehead hails originally from Shreveport, Louisiana, and has been based out of Nashville, TN since the fall of October of 2009.

Starting out as just a guitar player, he quickly began learning production and songwriting which led to signing his first publishing deal in 2011.

Since then, Forest has produced five #1 songs and has written four #1 songs most recognized for country superstar Kelsea Ballerini. He has a 2021 Grammy nomination for his work with Mickey Guyton for a song called “Black Like Me.”

After achieving success with his career in mainstream country radio, Whitehead has started an online presence called Music City Playbook that educates songwriters, artists, and producers on everything from songwriting, production, and publishing deals in the Nashville music industry.

With weekly production tutorials posted on his YouTube Channel, Forest’s goal is to become the go-to place online for quick success for songwriters wanting to produce their own music from home.