We traveled down to New Orleans the other day to celebrate my good friend Jerry Henderson’s birthday and decided to bring along a StudioLive. Check it out!
This is one of our most popular questions we get in tech support. I explain how to assign and route fx on the StudioLive 16.4.2.
Check out this video showing the new 64bit Universal Control Driver plus the new StudioLive firmware adding daisychaining and 31band EQ!
This video continues a look at the new driver and firmware as well as a sneak peek at some new StudioLive Accesories that will be available in June!
Here’s a look at a typical recording session in a studio using the StudioLive as my interface as well as sending headphone mixes to an entire band.
Aside from working with Capture, the StudioLive 16.4.2 also is a great front end for Apple’s Logic Studio. In this blog, we’ll show you how to set up a Logic Project from scratch that will allow you to record all of the analog inputs of your Studiolive mixer and route the outputs correctly so you can mixdown using the board.
Here’s a video we did at NAMM when we got the very first StudioLive hot off of the production line.
-Victor Wooten’s instrument went to a DI and then to the StudioLive. Steve Bailey was plugged into an effects processor, then a DI, and finally the StudioLive.
-David Haynes’s percussion controller triggered Easy Drummer software on a laptop equipped with a PreSonus AudioBox interface, patched to a pair of StudioLive line inputs.
-We recorded everything directly to Capture and did a quick mix; check it out!